Ngwongwo igwe eji agbado ọkụ nchara 45 ogo
45 ogo ikpere ụkwụ
Ihe: Carbon Steel, igwe anaghị agba nchara, Alloy Steel
Nka na ụzụ: Akpụkọrọ ọnụ na ịkwanye
Njikọ: Welding
ọkọlọtọ: ANSI,ASME,AP15L,DIN,JIS,BS,GB
Ụdị: 45° na 90°LR/SR ikpere ụkwụ, Mbelata, Tee, Bends, Cap, Cross.
Ọkpụrụkpụ mgbidi: SCH5-SCH160 XS XXS STD
Elu: Agba ojii/Mkpụrụ nchara na-apụghị ịgbagha agbagha / galvanized na-ekpo ọkụ
Akụkụ: 30/45/60/90/180°
Nha: 1/2"-80"/DN15-DN2000
Asambodo: ISO -9001:2000, API, CCS
Ngwa: Industrylọ ọrụ kemịkalụ, ụlọ ọrụ mmanụ ala, ụlọ ọrụ nrụpụta na ndị ọzọ
Nyocha: Nyochaa n'ime ụlọ mmepụta ihe ma ọ bụ nyocha nke atọ
Mbukota: Plywood pallets / osisi osisi ma ọ bụ dị ka nkọwa gị si dị
Ekịrịka bụ ọkpọkọ ọkpọkọ nke na-agbanwe ntụziaka nke pipeline na usoro pipeline.Dị ka akụkụ, e nwere atọ a na-ejikarị elbows: 45 Celsius na 90 ° 180, na ndị ọzọ na-adịghị mma angle elbows dị ka 60 Celsius na-gụnyere dị ka mkpa nke oru ngo.Ihe ikiaka gụnyere igwe nkedo, igwe anaghị agba nchara, igwe anaghị agba nchara, igwe nkedo a na-akpụ akpụ, carbon steel, ọla anaghị agba nchara na plastik.Ụzọ njikọ na ọkpọkọ gụnyere: ịgbado ọkụ ozugbo (usoro a na-ejikarị eme ihe) njikọ flange, njikọ ọkụ ọkụ, njikọ ọkụ eletrik, njikọ eriri na njikọ oghere.Dị ka usoro mmepụta, ọ nwere ike kewaa n'ime: ịgbado ọkụ elbow, stamping elbow, push elbow, casting elbow, etc. aha ndị ọzọ: 90 degrees elbow, right angle bend, love bend, etc.
ASME B16.9, B16.28
| Nha ọkpọkọ | Ngwa niile | 90 & 45 ikpere na Tees | Mbelata na Lap Joint Stub na-akwụsị | Okpu | |||||||
|
| Dayameta dị n'èzí na Bevel, D (1) | Dayameta dị n'ime na ngwụcha (1) | Ọkpụrụkpụ mgbidi t | Akụkụ etiti-na-ọgwụgwụ A,B,C,M | Ogologo mkpokọta, F,H |
| |||||
|
|
|
|
|
|
| Ogologo mkpokọta, E | |||||
|
|
|
|
|
|
|
| |||||
|
| IN | MM | IN | MM |
| IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | + 0.06 | + 1.6 | ±0.03 | ±0.8 | Ọ bụghị ihe na-erughị 87.5% nke oke arọ | ±0.06 | ±2 | ±0.06 | ±2 | ±0.12 | ±3 |
|
| -0.03 | -0.8 |
|
|
|
|
|
|
|
|
|
| 3 ~ 2½ | ±0.06 | ±1.6 | ±0.06 | ±1.6 |
|
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
| 5 ~ 8 | + 0.09 | + 2.4 |
|
|
|
|
|
|
| ±0.25 | ±6 |
|
| -0.06 | -1.6 |
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | + 0.16 | + 4.0 | ±0.12 | ±3.2 |
| ±0.09 |
| ±0.09 |
|
|
|
|
| -0.12 | -3.2 |
|
|
|
|
|
|
|
|
|
| 20-24 | + 0.25 -0.19 | + 6.4 -4.8 | ±0.19 | ± 4.8 |
|
|
|
|
|
|
|
| 26-30 |
|
|
|
|
| ±0.12 | ±3 | ±0.19 | ±5 | ±0.38 | ±10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 32-48 |
|
|
|
|
| ±0.19 | ±5 |
|
|
| |
| Nha ọkpọkọ | Ụkwụ Njikọta Akwụsị (2) | 180 laghachi azụ | ||||||||||
|
| N'èzí dayameta nke Lap, G | Ọkpụrụkpụ ụkwụ | Fillet Radius nke Lap, R | Akụkụ etiti-na-etiti, O | Azu-na- Akụkụ ihu, K | Nhazi nke Akwụsị, U | ||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
|
| IN | MM | IN | MM | IN | MM | IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | + 0-0.03 | + 0-1 | + 0.06-0 | + 1.6-0 | + 0-0.03 | + 0-1 | ±0.25 | ±6 | ±0.25 | ±6 | ±0.03 | ±1 |
| 3 ~ 2½ |
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
|
|
|
| + 0-0.06 | + 0-2 |
|
|
|
|
|
|
| 5 ~ 8 |
|
|
|
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | + 0-0.06 | + 0-2 | + 0.12-0 | + 3.2-0 |
|
| ±0.38 | ±10 |
|
| ±0.06 | ±2 |
| 20-24 |
|
|
|
|
|
|
|
|
|
|
| |
| Nha ọkpọkọ | Agbapụ n'akuku, Q | Ọpụpụ Plane, P | ||
|
| IN | MM | IN | MM |
| ½ ~ 4 | ± 0.03 | ± 1 | ± 0.06 | ± 2 |
| 5 ~ 8 | ± 0.06 | ± 2 | ± 0.12 | ± 4 |
| 10 ~ 12 | ± 0.09 | ± 0,19 | ± 5 | |
| 14-16 | ± 3 | ± 0,25 | ± 6 | |
| 18-24 | ± 0.12 | ± 4 | ± 0,38 | ± 10 |
| 26-30 | ± 0,19 | ± 5 | ||
| 32-42 | ± 0,50 | ± 13 | ||
| 44-48 | ± 0,75 | ± 19 | ||
IHE:
Ọpụpụ bụ nchikota nke ụkpụrụ zuru oke nke gbakwunyere na mwepu ndidi.
N'èzí dayameta nke gbọmgbọm hụ tebụl dị na ibe 15.
